Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "cannondale"

SKS Cannondale Headshok Adaptor for SKS Shockoard Fender
$6.99
Cannondale Headshok Adaptor for the SKS Shockboard Fender
Cannondale Alloy Handlebar End Plugs
$9.00
Add some extra style to your bars with Cannondale's Alloy Handlebar End Plugs. These low-profile plugs provide some added protection for you and your bars, and use expansion plugs to secure your tape and caps.
Wheels Manufacturing Inc. Universal Bottom Bracket Drift
$15.00
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
Problem Solvers Head Tube Reducers
$19.99 - $39.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
Cannondale Synapse Bar Tape
$21.00
Add a little comfort and style to your ride with Cannondale's Synapse Bar Tape. It features a soft and durable suede finish with a gel backing for your riding enjoyment.
Cannondale Eileen 3 Rear-Mount Kickstand
$22.00
• Telescoping leg that offers expanded versatility to fit a wide range of bicycles • Crafted of lightweight and durable aluminum alloy • Equipped with a firm spring that prevents movement while riding • Includes a retro adapter plate
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$29.50
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$29.50
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wolf Tooth Components CAMO Direct Mount Spider for Cannondale
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only
Wheels Manufacturing Inc. Derailleur Hanger 269
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284
FSA BB386 to Cannondale PF30A/BB30A Adapter
$32.99
If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.
Cannondale Burgerman
$35.00
Cannondale's Burgerman kids helmet combines protection, ventilation, and Jon Burgerman's fun designs for a helmet your little ones won't take off. Sizing - X-Small: 48-54cm - Small: 52-57cm Features - Weight: 240g (Small)- - Multiple vents, including some with bug screens - In fusion mold technology - Easy fit system - Soft-touch webbing and pinch guard buckle
Cannondale 1.5-inch Stem
$40.00 - $65.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Wheels Manufacturing Inc. Derailleur Hanger 293
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-2 R3 (KP432) - For DT Swiss Thru Axle Not the same as DROPOUT-295. Check for correct thru axle fit.
Wheels Manufacturing Inc. Derailleur Hanger 302
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x12 Socket Head Screw Included - For MAXLE 12x1.75 - Replaces Cannondale Part #CK3257U00OS
Wheels Manufacturing Inc. Derailleur Hanger 303
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x10 Socket Head Screw Included - For 12x1.0 Thru Axle - Replaces Cannondale Part #KP419
Cannondale 6Point3 Platform Pedals
$42.00
- 9/16" axle with sealed bearing system keeps out the elements for years of use - Full aluminum alloy body is lightweight and durable - Integrated rubber blocks and surface grip tape offer excellent traction
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$48.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
CycleOps Trainer Thru Axle Adapter
$49.99
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Teravail Cannonball 650 Tire
$55.00 - $60.00
Teravail designed the Cannonball to be a first-choice gravel racing tire — Dirty Kanza, Trans Iowa, Land Run…it’s conquered them all. The directional, tight-knit center tread efficiently decreases rolling resistance while the side knobs increase cornering traction. The center tread’s diamond pattern is optimized specifically for gravel riding and sheds dirt and gravel debris. The new 650B size adds more volume for increased comfort and added traction.
Teravail Cannonball 700c Tubeless
$55.00 - $60.00
There are routes covered with razor-sharp flint rock, where the wind is unforgiving, and the destination is far beyond the horizon. For the toughest days of gravel, when winning looks like finishing, Teravail created the Cannonball. The Cannonball is designed to be a first-choice gravel racing tire — Dirty Kanza, Trans Iowa, Land Run… it’s conquered them all. The directional, tight-knit center tread efficiently decreases rolling resistance while the side knobs increase cornering traction. The center tread’s diamond pattern is optimized specifically for gravel riding and sheds dirt and gravel debris. - Tubeless-ready for traction and comfort - The Durable model features a layer of woven aramid fiber reinforcement between the outer rubber and the inner casing for extra protection against abrasion and sharp gravel.
Teravail Cannonball 700c Tubeless-Ready
$55.00 - $60.00
The Cannonball was designed to be a first-choice gravel racing tire. The directional, tight-knit center tread efficiently sheds dirt and debris to decrease rolling resistance, while the side knobs provide effective cornering traction. - Designed and inspired by our experiences seeking the ideal all-terrain, all-weather tread pattern for gravel and adventure cycling - Tubeless ready for flat prevention, lower-pressure traction, and comfort - Durable casing protects against abrasion, sharp rocks, and gravel - Light & Supple casing provides a comfortable ride
Park Tool Thru Axle Adaptors
$59.95
Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc.) in the TS-2.2, use the TS-2TA Thru Axle Adaptors (sold separately).
Cannondale CAAD Helmet
$59.99
Light, fast, and ready to go in the sprint, Cannondale's CAAD helmet sports pro-level comfort and performance. Spacious vents channel a cooling breeze through the helmet, and soft, wicking pads keep the sweat from your eyes when you attack on the next grueling climb. One-handed adjustability and easy to use straps make it simple to dial in your perfect fit. - Small/Medium = 52-58cm - Large/X-Large = 58-62cm
Cannondale Radius Helmet
$60.00
Cannondale's Radius is a versatile helmet that is great for riding trails and roads. Its durable, one-piece polycarbonate outer shell is married to a dual-density EPS foam for excellent protection with a sleek, integrated design. Sporting 22 vents, the Radius sports exceptional airflow to keep you comfortable. The retention system offers EVA foam padding and soft-touch straps with cam-lock dividers that let you dial in the perfect fit. You also get a removable visor, allowing you to easily pop it on/off depending on the conditions. - Small/Medium = 52-58cm - Large/X-Large = 58-62cm
Cannondale Headshok Stem
$65.00
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)
Wheels Manufacturing Inc. Professional Universal Bottom Bracket Press
$75.00
Professional, shop-quality, version of the Wheels Mfg Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also be used as a frame bottom bracket shell sizing guide! - Machined aluminum handles and drifts - Brass inserts in the tool faces allow each handle to turn freely against drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Zinc-plated 1/2" diameter threaded rod - Works with BB shells up to 132mm wide Fits: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm) - 22/24/30mm inner bearing diameters
Cannondale CAAD MIPS Helmet
$80.00
Light, fast, and ready to go in the sprint, Cannondale's CAAD MIPS helmet sports pro-level comfort and performance. The MIPS system adds a low-friction layer to the helmet that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angled impacts. Spacious vents channel a cooling breeze through the helmet, and soft, wicking pads keep the sweat from your eyes when you attack on the next grueling climb. One-handed adjustability and easy-to-use straps make it simple to dial in your perfect fit.
Wheels Manufacturing Inc. BB30A Outboard ABEC-3 Bottom Bracket
$90.00
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
Wheels Manufacturing Inc. PF30A Outboard ABEC-3 Bottom Bracket for 22/24mm SRAM Spindles
$90.00
Specifically designed for installing 22/24mm spindle diameter cranks (SRAM) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
Page 1 of 11 Next page